The term plumbing as used in this article shall be construed to mean the installation of gas or water pipes, fixtures, apparatus and the necessary connections either for supplying gas or water to premises or for the removing of liquid and water-borne wastes from premises in the city, or both such purposes, and shall also denote installed fixtures, drainage and vent systems and gas or water distribution systems as the case may be.
(Code 2016)
There is hereby adopted and incorporated by reference, for the purpose of establishing rules and regulations for the practice of plumbing and gas-fitting, including the installation, maintenance, extension and alteration of all pipes, fixtures, appliances and appurtenances in connection with sanitary sewers and public and private water and fuel gas systems, the Uniform Plumbing Code, 2012 Edition, as recommended by the International Association of Plumbing and Mechanical Officials, such code being made as a part of the ordinances and code of the city as if the same had been set out in full herein, all as authorized and in the manner prescribed by K.S.A. 12-3009 through 12-3012 including any amendments thereto. One copy of the uniform code shall be marked or stamped “Official Copy as Incorporated by the Code of the City of Wellsville,” and shall be filed with the city clerk to be open to inspection and available to the public at all reasonable hours of business.
Any person violating any provisions of such code shall be punished as provided in section 1-116 of this code.
(Code 2016)
The following sections of this article are in addition to the provisions of the standard code incorporated by reference in section 4-402.
(a) 1202.1 Nonflammable medical gases. The following requirement shall be added to this section:
(1) On and after January 1, 2011, no person shall install, improve, repair, maintain or inspect a medical gas piping system within a county or city unless such person: (a) is licensed under the provisions of K.S.A. 12-1508 et seq., and amendments thereto; and (b) is certified under the appropriate professional qualifications standard or standards of ASSE Series 6000. All installers shall obtain a proper permit from the county of city for which the medical gas is being installed, all inspections shall be done by a third party agency certified under the appropriate professional qualifications standard or standards of ASSE Series 6000 for medical gas systems inspectors and all documentation of the inspections and certifications of installers and inspectors shall be provided to the county or city prior to any occupancy of the building or unit of the building in which the medical gas piping has been installed until an occupancy permit is issued.
(2) As used in this subsection, “medical gas piping” means the piping used solely to transport gasses used for medical purposes at a health care facility.
(b) 305.4.1 Sewer Depth. Building sewers that connect to private sewage disposal systems shall be installed not less than 18” below finished grade at the point of septic connection. Building sewers shall be installed not less than 24 inches below grade.
(c) 403.2 Separate facilities. Where plumbing fixtures are required, separate facilities shall be provided for each sex.
Exceptions:
(1) Separate facilities shall not be required for private facilities, including dwelling units and sleeping units.
(2) Separate employee facilities shall not be required in occupancies in which 15 or less people are employed.
(3) Separate facilities shall not be required in structures or tenant spaces with a total occupant load, including both employees and customers, of 15 or less.
(4) Separate facilities shall not be required in mercantile occupancies in which the maximum occupant load is 50 or less.
(d) 701.3.1 Separate sewer connection. All residential duplex and or condominium units shall have installed separate sanitary sewer service lines to each living unit, from the main line to the living unit.
(e) Table 702.3 Building sewer pipe. Delete vitrified clay pipe, SDR35 and S&D Rated Only.
(f) 708.3.5.1 Building drain and building sewer junction. An approved type clean out fitting shall be installed outside of the building and extended above grade from the waste or soil lines serving a building constructed with concrete floor or with a crawl space foundation.
(g) Footnote a. to Table 710.1(1) Building Drains and Sewers. The minimum size of any building drain serving a water closet shall be four (4) inches.
(h) 715.1 Sewage Backflow. Where the flood level rims of plumbing fixtures are below the elevation of the manhole cover of the next upstream manhole in the public sewer, such fixtures shall be protected by a backwater valve installed in the building drain, branch of the building drain or horizontal branch serving such fixtures. Additionally, backwater valves must be installed at the owner’s expense in residential drains under any of the following circumstances: (1) the residence experiences a sanitary sewer backup that, as determined by the City Building Inspector or Wastewater Superintendent, was directly caused by a backup in the public sewer main; or (2) a new residence is being constructed; or (3) replacements or repairs are being made to an existing residential sanitary sewer lateral line; or (4) a residential remodeling project that exceeds twenty five percent of the residential structure, or (5) more than twenty five percent of the plumbing fixtures in a residential structure are replaced. The plumbing permit fee for installation of a backwater valve at a residence shall be waived by the city.
(i) 903.1 Roof extension. All open vent pipes that extend through a roof shall be terminated at least six inches (6”) above the roof, except that where a roof is to be used for any purpose other than weather protection, the vent extensions shall be run at least seven feet (7’) above the roof.
(Code 2016)
The building inspector or his or her authorized designee shall be responsible for the administration and enforcement of this article and appointment of a plumbing inspector in accordance with section 4-204 of this chapter, which apply in a like manner to this article.
(Code 2016)
The building inspector may assume the responsibilities of or appoint some qualified officer or employee of the city to be and perform the duties of plumbing inspector as may be required, subject to the consent and approval of the governing body.
(Code 2016)
The plumbing inspector shall have the following duties:
(a) To enforce all regulations relating to plumbing construction, alteration, repair or removal;
(b) May permit, with the approval of the governing body, on the basis of duly authenticated reports from recognized sources, the use of new materials or modes of construction, not provided for in this article, and may, for the purpose of carrying out the intent of this article adopt an accepted standard of material or workmanlike practices of federal or state bureaus, national, technical organizations or fire underwriters;
(c) To examine all buildings in the process of erection, construction, alteration or relocation in the city for the purpose of determining whether the work is in compliance with the plumbing permit given and in compliance with the regulations of the city pertaining to such work, including zoning regulations; and
(d) To keep comprehensive records of applications, of permits or certificates issued, of inspections made, of reports rendered, and of notices or orders issued. All such records shall be open to public inspection during stated office hours, but shall not be removed from the office of the building official or plumbing inspector without his or her written consent.
(Code 2016)
The plumbing inspector shall have the following powers:
(a) To enter any building or structure or premises at any reasonable hour, whether complete or in the process of erection, to perform the duties contained in this chapter;
(b) To adopt and enforce all such prudent emergency measures as he or she may deem necessary and expedient for the public safety under the laws of the city;
(c) May cause any work done in violation of this chapter to be discontinued until he or she shall have satisfactory evidence that the work will be done in accordance with the plumbing regulations of the city, subject to the right of any plumber, plumbing contractor or owner to appeal to the governing body.
(Code 2016)
The plumbing inspector, or his or her agent, upon proper identification, shall have authority to enter any building, structure or premises at any reasonable hour to perform his or her duties as set out in this chapter.
(Code 2016)
(a) The governing body shall be the final determiner of the scope and meaning of all provisions of the plumbing code which may be unclear, ambiguous, or requiring interpretation.
(b) The plumbing inspector shall have power to modify any of the provisions of the plumbing code upon application in writing by the owner or lessee or his or her authorized agent, when there are practical difficulties in the way of carrying out the strict letter of the code. In approving modifications, the plumbing inspector shall see that the spirit of the code is observed, public safety secured and substantial justice done. The particulars of a modification when granted or allowed and the decision of the inspector thereon shall be entered upon the records of the plumbing inspector and a signed copy shall be furnished to the applicant.
(Code 2016)
(a) It shall be unlawful to install, alter or reconstruct any plumbing or plumbing system, as defined by the plumbing code and section 4-401, in any building in the city without first making application to and receiving a permit therefor from the city clerk, after approval by the chief building official or his or her authorized assistant. The application for such permit shall be made and the permit obtained before any plumbing work is commenced.
(b) No permit shall be required for making minor repairs of any plumbing including repair of leaks in water pipes, traps or cocks, opening up stoppage in waste or supply pipes, traps or drains, replacing fixtures when waste pipes are not disturbed, or replacing frozen pipes inside the building, and like repair work not involving original installation or reconstruction.
(Code 2016)
(a) A plumbing permit shall be issued upon an application in writing to the office of city clerk on a form or forms provided for the purpose. This application shall, among other things, disclose the following:
(1) The name of the owner of the lot or tract of ground;
(2) The location of the building or structure;
(3) The plumbing work proposed;
(4) The class of occupancy;
(5) The class of construction;
(6) The kind of materials to be used;
(7) The estimated cost of the work;
(8) The date work will commence;
(9) Expected date of completion;
(10) Name and address of plumber, plumbing contractor or contractors doing the work;
(11) Such other information as may be pertinent to the issuance of the required permit.
(b) An application for a plumbing permit shall be signed by the owner or his or her duly authorized agent, or a plumber or plumbing contractor licensed by the city. If the application is made by the owner or his or her agent, it shall contain the name or names of the licensed plumber, plumbing contractor or contractors doing the work described, or a plumbing permit may be issued to the owner upon his or her application disclosing satisfactory evidence that the proposed work will be performed by the owner, himself or herself and not by a licensed plumber or plumbing contractor, and likewise subject to the final approval of the plumbing inspector for work performed.
(c) Upon approval of the completed application and a determination that a permit should be issued, the chief building official or his or her assistant shall issue a permit to the owner or contractor authorizing the plumbing work covered by the application.
(d) Any permit issued under this section shall be valid and subsisting for a period of not more than six months from the date of issuance unless the permittee shall have commenced, within the period so limited, the plumbing work authorized by such permit. Plumbing work commenced for the purpose of this section shall mean the beginning of plumbing work other than the preparation of plans or the letting of a plumbing contract.
(Code 2016)
Whenever an application for a plumbing permit is made, the chief building official or the plumbing inspector may, if he or she finds it necessary to determine whether work described in the application will comply with the laws pertaining to such work, require that the applicant file a written description or drawing of the proposed plumbing construction as may be prepared for the purpose. If such drawing or description is insufficient for the purposes of determining whether a permit should be issued, the chief building official or the plumbing inspector may require the applicant to file complete architectural and engineering plans and specifications for such building or construction, or any part thereof, as may be necessary for the inspector to determine compliance with this article. The filing of such plans and specifications and the approval thereof in connection with an application for a permit shall not in any way affect the authority of the city to deny or issue a permit, or to inspect any plumbing work for conformity with this article.
(Code 2016)
The fee for a plumbing permit shall be as set forth in the city Fee Resolution, however no fee shall be required to obtain a permit where the total estimated cost, the reasonable value of all services, labor and materials required, is under an amount set by the city Fee Resolution. The fee herein shall be paid to the city clerk upon obtaining a plumbing permit and the same shall be credited to the general operating fund of the city.
(Code 2016)
A copy of the plumbing permit shall be kept on the premises for public inspection during the performance of the work and until the completion of the same. The plumbing inspector may require a certified copy of the approved plans to be kept on the premises at all times from the commencement of the work to the completion thereof.
(Code 2016)
Upon the completion of any plumbing work covered by this article, it shall be the duty of the person doing such work to notify the plumbing inspector and request that it be inspected; after which such work shall be inspected promptly as hereinafter provided.
(Code 2016)
(a) When any plumbing is to be hidden from view by the permanent placement of parts of the building, the person, firm or corporation installing the plumbing shall notify the plumbing inspector and such equipment shall not be concealed until it has been inspected, approved or authorized by the plumbing inspector or until 24 hours, exclusive of Saturdays, Sundays and holidays, shall have elapsed from the time of such notification. On large installations, where the concealment of plumbing proceeds continuously, the person, firm or corporation installing the plumbing shall give the plumbing inspector due notice and inspections shall be made periodically during the progress of the work.
(b) The plumbing inspector shall have the authority to require owners or contractors to open such work which, in any manner, conceals plumbing that has been closed without his or her knowledge or permission, and in no case shall the inspector issue a certificate of approval until satisfied that the work is in accordance with the provisions of this article. The inspector shall also have the right to refuse to issue a certificate of approval on any plumbing, that is concealed in such manner that it cannot be fully determined that it has been done in accordance with this article.
(Code 2016)
An initial inspection fee and an inspection fee for subsequent inspections required shall be set by the city Fee Resolution and shall be paid before any plumbing will be approved or a certificate of approval issued.
(Code 2016)
(a) When the plumbing inspector finds plumbing construction to be in conformity with the provisions of this article, he or she shall issue to the person, firm, or corporation performing the plumbing construction, a certificate of approval, with duplicate copy for delivery to the owner, authorizing the use of the plumbing system and connection to the supply of gas or water, as the case may be.
(b) When a certificate of approval is issued authorizing the connection and use of a temporary gas or water supply, the certificate shall expire at a time to be stated therein and shall be revocable for cause by the plumbing inspector.
(c) In no case shall certificates of approval be issued on plumbing or plumbing systems or parts of systems where the work installed does not conform to the requirements of this article.
(d) If, upon inspection, the plumbing or plumbing system is not found to be fully in conformity with the provisions of this article, the plumbing inspector shall immediately notify the person, firm, or corporation making the installation of the existing defects.
(e) No certificate of approval shall be issued unless the plumbing or plumbing system has been installed in strict conformity with the provisions of this article and unless the plumbing or plumbing system is made in compliance with nationally approved methods of construction for safety to life and property as herein set forth.
(f) The plumbing inspector shall be deemed the judge of whether the plumbing or plumbing system has been made in accordance with the requirements of this article.
(g) No certificate of approval shall be required for making minor repairs of any plumbing including repair of leaks in water pipes, traps or cocks, opening up stoppage in waste or supply pipes, traps or drains, replacing fixtures when waste pipes are not disturbed, or replacing frozen pipes inside the building, and like repair work not involving original installation or reconstruction.
(Code 2016)
It shall be unlawful for any person, firm, or corporation to make connection to a supply of gas or water for which an inspection is required, or which has been disconnected by the order of the plumbing inspector, until a certificate of approval has been issued by the plumbing inspector authorizing the connection and use of such plumbing or plumbing system. The plumbing inspector may, at his or her discretion, authorize a temporary connection.
(Code 2016)
(a) If in the judgment of the plumbing inspector, after inspection, the plumbing or plumbing system in any building are unsafe or dangerous to persons or property, the inspector shall have the power to cause the plumbing or plumbing system to be disconnected from the supply of gas or water and may, at his or her discretion, seal the control valves for the same in a closed or disconnected position, whereupon he or she shall give notice to the owner, or his or her agent, or by posting such notice at the site and shall also notify the utilities serving the premises. Thereafter, it shall be unlawful for any person to cause or permit gas or water to be supplied to the plumbing or plumbing system so sealed until they shall have been made safe and the inspector shall have issued a certificate of approval to that effect.
(b) When the plumbing inspector condemns all or part of any plumbing system, the owner may, within 10 days after receiving written notice thereof, file a petition in writing for review of the action of the plumbing inspector by the governing body, upon the receipt of which the governing body shall at once proceed to determine the facts, and within 10 days from receiving the petition make a decision in accordance with their findings.
(Code 2016)
When it appears that the laying or repairing of any water or sewer pipes or the making of any connection therewith shall require excavation in any street, alley or public way of the city or the cutting or removal of any pavement, curb or gutter or any sidewalk, during the course of such work, the application for a permit shall so state and describe the location and extent of the excavation, cutting or removal. Before the city clerk shall issue any permit for such work, the applicant shall pay any fee required by this code. All excavations shall be barricaded and guarded as provided by the appropriate sections of this code. Before any such excavation shall be backfilled, new plumbing work therein shall be inspected and the bottom of the excavation holding any sewer, drain or water pipe shall be so filled, leveled and tamped as to properly support the pipe and permit proper drainage when carrying sewage, and the excavation shall be backfilled and all paving, curbing, guttering or sidewalks shall be restored as near as possible to their last condition, subject always to the approval of the plumbing inspector or the superintendent of streets.
(Code 2016)
Nothing herein contained shall prohibit any property owner from personally installing plumbing piping or equipment within and upon his or her own residence and intended for his or her personal use and permanent occupancy; provided, the owner shall satisfy the plumbing inspector as to his or her ability to install such piping or equipment, secure a permit, pay required fees, do work in accordance with this article, and apply for an inspection and receive approval. Personal installation by an owner under this section shall be by himself, herself, for himself or herself on his or her own residence, without compensation and no person shall be employed to assist him or her in any way on such work except a plumber or plumbing contractor licensed by the city.
(Code 2016)
No plumbing materials, appliances or equipment shall be installed in the city unless they are in conformity with the provisions of this article and with the approved standards of construction for safety to life and property. Conformity of materials for plumbing materials, appliances and equipment to the standards of the Underwriters Laboratories, Inc. shall be prima facie evidence that the materials, devices, appliances and equipment comply with the requirements of this article.
(Code 2016)
This article shall not be construed to relieve from or lessen the responsibility or liability of any party owning, operating, controlling or performing any plumbing construction for damages to persons or property caused by any defect therein, nor shall the city be held as assuming any such liability, by reason of the inspection or re-inspection authorized herein, or the certificate of approval of any work or equipment authorized herein or by reason of any permit or license granted herein.
(Code 2016)
If any section of the Uniform Plumbing Code or of this article shall be held unconstitutional or otherwise invalid by any court of competent jurisdiction, then such section shall be considered separate and apart from the remaining provisions of the Uniform Plumbing Code or of this article, the section is to be completely severable from the remaining provisions which shall continue in full force and effect.
(Code 2016)